CCNA Practice Test | N.J 180 Degree

CCNA Exploration2: Routing Protocols and Concepts – Chapter 11 Exam

May 1st

Posted by Nathan in CCNA | Please wait

01. Refer to the exhibit. What does the “O*E2″ from the “O*E2 0.0.0.0/0 [110/1] via 192.168.1.1, 00:05:34, Serial0/0″ line represent?

an internal type 2 OSPF route.
an external OSPF route at least two hops away.
an external OSPF route from two different sources.
an external OSPF route that will not increment in cost.
a default route.
The route was distributed into OSPF from a type 2 router.

(more…)

CCNA Exploration2: Routing Protocols and Concepts – Chapter 8 Exam

Apr 27th

Posted by Nathan in CCNA | Please wait

7 comments

01. Refer to the exhibit. What can be determined from this output?

The router will have to perform recursive lookups to forward a packet destined for 192.168.2.213/24.
The parent route for these networks was removed from the routing table.
A route to 192.168.0.0/25 would be classified as a supernet route for the routes listed in the routing table.
All of the routes listed are network routes.

02. Refer to the exhibit. A packet destined for host 128.107.0.5/16 is processed by the JAX router. After finding the static route in the routing table that matches the destination network for this packet, what does the router do next?

searches for a default route to forward the packet
drops the packet since the static route does not have an exit interface
performs a recursive lookup to find the exit interface used to forward the packet
sends a request to neighboring routers for the location of the 128.107.0.0 network (more…)

CCNA Exploration2: Routing Protocols and Concepts – Chapter 5 Exam

Apr 18th

Posted by Nathan in CCNA | Please wait

11 comments

01. Refer to the exhibit. All routers in the exhibit are running RIP v1. The network administrator issues the show ip route command on router A. What routes would appear in the routing table output if the network is converged? (Choose two).

R 192.168.2.0/24 [120/1]
C 192.168.2.0/24 [120/1]
R 10.10.3.0/24 [120/0]
C 10.10.3.0/24 [120/1]
R 10.10.1.0/24 [120/2]
R 10.10.1.0/24 [120/3] (more…)

CCNA Exploration 1: Network Fundamentals – Chapter 11 Exam

Feb 25th

Posted by Nathan in CCNA | Please wait

4 comments

01. Immediately after a router completes its boot sequence, the network administrator wants to check the routers configuration. From privileged EXEC mode, which of the following commands can the administrator use for this purpose? (Choose two.)